Vendor: TDG Scientific

4 ft. RXPert Single Filtered Balance System, Tall/Deep, Guardian Monitor, Canopy Connection Kit, Exhaust Damper, Epoxy Work Surface, 115V
$18,921.84 Original price was: $18,921.84.$16,894.50Current price is: $16,894.50.
Discount: 11% OFF
Recently Viewed Products
-
C-Flex Opaque Tubing, 0.500 I.D. x 0.688 O.D. Wall 0.094, 50 ft
$636.25Original price was: $636.25.$516.44Current price is: $516.44. -
Metro TableWorx TWM3648SI-304B-S Mobile Work Table 36" x 48" Type 304 Stainless Steel Surface With Back Splash, Stainless I-Frame, ALL SS FINISH
$3,100.12Original price was: $3,100.12.$1,617.57Current price is: $1,617.57. -
Stabilwax-DA Cap. Column 60m 0.32mm ID 0.50um, 5in. Cage for Agilent 6850 GC
$1,497.02Original price was: $1,497.02.$1,336.63Current price is: $1,336.63. -
United Scientific CULTURE TUBES, DISPOSABLE, WITH SCREW-CAP FINISH, OVER FLOW VOLUME 8 ML
$294.48Original price was: $294.48.$239.02Current price is: $239.02. -
Anti-MOUSE IgG (H&L) (GOAT) Antibody Peroxidase Conjugated (Min X Human Serum Proteins), 2mg, Lyophilized
$249.40Original price was: $249.40.$202.44Current price is: $202.44. -
CCPG-0625-0875 | Pump Grade Silicone Tubing 0.625" ID x 0.875" OD , 25 Ft. Coil
$605.93Original price was: $605.93.$316.16Current price is: $316.16. -
Rxi-1ms Cap. Column 30m 0.53mm ID 1.00um, 5in. Cage for Agilent 6850 GC
$1,032.92Original price was: $1,032.92.$922.25Current price is: $922.25. -
Rxi-17 Cap. Column 30m, 0.25mm ID, 0.25um, 5in. Cage for Agilent 6850 GC
$791.35Original price was: $791.35.$706.56Current price is: $706.56. -
JG Finneran 1.5 mL Black Polypropylene Snap Seal Vial, 12 x 32 mm, 11 mm Crimp
$313.68Original price was: $313.68.$280.08Current price is: $280.08. -
DURAN Laboratory glass bottle GL 45, clear, pressure plus+ pressure resistant, protect+ plastic coated (PA12), with protective cap, 250 mL
$667.07Original price was: $667.07.$541.45Current price is: $541.45.
Similar Products
More from this brand
12 ft. Protector XL Floor-Mounted Hood with Horizontal-Sliding Sashes, 37.7 in. Exterior Depth, with 2 Service Fixtures, 208-230V, 50/60Hz
$40,907.16 Original price was: $40,907.16.$36,524.25Current price is: $36,524.25.
Labconco Protector Premier Laboratory Fume Hood, 8 ft., Two Service Fixtures and Electrical Duplex, No Blower, 115V, 60Hz
$23,467.08 Original price was: $23,467.08.$20,952.75Current price is: $20,952.75.
SpillStopper Work Surface, 10 ft. w x 36 in. d, no cutouts
$7,432.32 Original price was: $7,432.32.$6,636.00Current price is: $6,636.00.
6 ft. Protector Stainless Steel Radioisotope Laboratory Hood, 37.7 in. deep, 230V
$36,720.60 Original price was: $36,720.60.$32,786.25Current price is: $32,786.25.
SpillStopper Work Surface, 6 ft. w x 30 in. d, with cupsink cutouts, left rear and right side
$3,727.92 Original price was: $3,727.92.$3,328.50Current price is: $3,328.50.
8 ft. Protector I-S XL Benchtop Hood, 37.7 in. Exterior Depth, 100-115V, 50/60Hz
$23,249.52 Original price was: $23,249.52.$20,758.50Current price is: $20,758.50.
SpillStopper Work Surface, 6 ft. wide, 36 in. deep, with cupsink cutout, right rear, for Protector XStream Hoods
$4,086.60 Original price was: $4,086.60.$3,648.75Current price is: $3,648.75.
SpillStopper Work Surface, 7 ft. w x 36 in. d, with cupsink cutout, left rear
$4,615.80 Original price was: $4,615.80.$4,121.25Current price is: $4,121.25.
FreeZone 4.5L -105C Benchtop Freeze Dryer with Stainless coil 230V 60Hz North America
$26,054.28 Original price was: $26,054.28.$23,262.75Current price is: $23,262.75.
SpillStopper Work Surface, 5 ft. w x 30 in. d, with cupsink cutouts, left side and right rear
$3,216.36 Original price was: $3,216.36.$2,871.75Current price is: $2,871.75.
Protector Premier, 5 ft., No Services, With Blower, 230V, 60Hz
$18,486.72 Original price was: $18,486.72.$16,506.00Current price is: $16,506.00.











